Wires for soldering, 12 pcs. Wires 26 AWG. Length 20 cm (7.87 inch). Crimped with pins on both sides.
By default, all control devices (thumb throttle, brake levers, switches, etc.) are connected to the ports located on the back of the On-Board Computer. To access, you need to unscrew five screws and remove the plastic cover. For connection, PHD 2.0 connectors and crimp pins are used, which are included in the kit. If you do not have a crimping wire tool, for example, SN-2549, you can use these crimped wires
It is necessary to cut them in the middle, solder them to the wires of the throttle or brake handles, and insert the crimped ends into the PHD 2.0 connectors (include in the kit of On-board computer) and connect them to the On-board computer.